Re-configure your Light after Installation

You are able to re-configure the light that is directly connected to your Brilliant Control at any time. 

On the top right hand corner on the Home Screen, tap "Settings" > "Light" > under Device Info tap "Re-Configure Light." 

You will be presented with the following options to re-configure your light: 

  • # of switches that control your light/device 
  • Type of light
    • Standard (This is your traditional dimmable or non-dimmable light) 
    • Always On (Any circuit that you want to provide constant power to) 
    • On/Off Switch (e.g. A fan or smart plug)