Resetting Your Brilliant Switch

If you need to reset your switch to re-connect it or due to issues you are seeing, take a look at these tips and steps below. 

1. To reset, make sure you see a solid WHITE light from the safety disconnect (the small LED light under the Brilliant Logo at the bottom)
2. Pull the safety disconnect out from the switch so the LED turns off.
3. Now, push the safety disconnect back into the switch so it’s flush to the switch face. The light should come on briefly after. 
4. Wait another 3-5 seconds
5. Take the length of your finger and place it fully on the non-slider portion, and hold for 15-20 seconds, or until the LED light changes from solid to blinking. 
   • Try not to move your finger when you place it on the switch. 
   • If you're having trouble with this step, try to place as much surface area of your finger on here.
6. Once the LED light is BLINKING WHITE you have successfully reset your Brilliant Switch.