Configuring your multiway setup when you have Switch + Control

Switch = Load Side; Control = Line Side

Control = Load SIde; Switch = Line Side

Multiway Configuration where Switch is Load Side and Control is Line Side

Since your Control is receiving power (Line Side), we will need to configure the Control to pass the power to the load side and remap the slider for the fixture you wish to control that is currently controlled by your Smart Dimmer Switch.

Load Side Switch Configuration

1. Open the Brilliant Mobile app and go to Settings --> Install
2. Start the install of a Smart Dimmer Switch
3. On the step where it asks how many Switches control your load, make sure to select 1. (This is because only the Load side switch will control the load...all other switches will communicate with the load side switch via Bluetooth or Wi-Fi).
4. Complete the configuration of this load side Switch

Line Side Control Configuration

1. Go to the Brilliant Control.
2. Tap on Settings --> Light --> select the # corresponding to the positon (multi-gang units only)
3. Tap on “Re-configure” under “DEVICE INFO” and select Light Type as “Always On”. When it asks you how many switches control this load, select 1. (This is because only the Load side switch will control the load...all other switches will communicate with the load side switch via Bluetooth or Wi-Fi).
4. Once your light is reconfigured as Always On, go to Settings --> Slider (multigang Controls only) (for single gang Control go to Gestures)
5. Now you are on the control's slider settings. Scroll to Slider Controls below and select “Update Slider Settings” and update the slider to control the load (from the load side Switch).

Multiway Configuration where Control is Load Side and Switch is Line Side

Since your Switch is receiving power (Line Side), we will need to configure the Switch to pass the power to the load side and remap the slider for the fixture you wish to control that is currently controlled by your Brilliant Control.

Load Side Control Configuration

1. From your Brilliant Control, go to Settings
2. Tap on Light --> select the # corresponding to the position (multi-gang units only)
3. Tap on "Re-Configure" under Device Info" and select Light Type to be whatever your light type is. When it asks you how many switches control this load, make sure to select 1. (This is because only the Load side switch will control the load...all other switches will communicate with the load side switch via Bluetooth or Wi-Fi).

Line Side Switch Configuration

1. Open the Brilliant Mobile app and go to Settings --> Install
2. Start the install of a Smart Dimmer Switch
3. When you are setting up the light type, make sure to select Power Outlet (Always On)
4. On the step where it asks how many Switches control your load, make sure to select 1. (This is because only the Load side switch will control the load...all other switches will communicate with the load side switch via Bluetooth or Wi-Fi).
5. Complete the configuration of this Switch

Once the Line Side Switch is configured to be Always On, we will need to reconfigure the slider to control the Load Side Control. 

1. From a Control, tap on Rooms
2. Tap the room the Switch is associated with
3. Tap the pencil in the top right-hand corner
4. Scroll down until you see the Switch you just configured (make sure you see a picture of the Switch)
5. Tap on the gear icon next to the Switch
6. Tap Update Slider Settings
7. Change the Slider to control the load associated with your Control (Load side).