High Wattage
You may see an image like the below during your setup experience.
This means your load has been detected to be greater than 300W (for the Brilliant Smart Home Control) and 500W (for the Brilliant Smart Dimmer Switch).
Therefore, we have disabled the light functionality for your safety.
You may re-check compatibility for your Brilliant fixtures from your Brilliant Control by visiting Device Settings > More Info or Re-configure.
Please check the wattage of your fixture, and contact support@brilliant.tech if any questions.
Fade-In Duration Settings for High Wattage Lights
If your light fixture is above 250W, Brilliant Smart Home Controls will detect your device as hig-wattage. For your safety the Brilliant Control will automatically adjust your dimming experience of your light fixture to the following speeds to fade in:
250 W - 300 W : 1 second fade in speed
300 W - 450W: 5 second fade in speed
450W or higher : 10 second fade in speed
Compatibility Unknown
During the compatibility check process, it is possible that Brilliant failed to determine compatibility for your fixture. In this situation, please check your fixture and retry until compatibility is determined.
You may re-check compatibility for your Brilliant fixtures from your Brilliant Control by visiting Device Settings > More Info or Re-configure.