Shelly Devices that Work With Brilliant

Brilliant can discover Shelly motion sensors and Window and Door Sensors that are Zigbee or Bluetooth connected. Read more about how to add your sensors to Brilliant here

How to Factory Reset a Shelly BLU Motion or Door/Window Sensor

Unpair Bluetooth Connection

Visit your mobile device’s Bluetooth settings. Unpair the Shelly device by forgetting the device. The device should be listed as “Shelly BLU Motion” if it is a motion sensor, or “SNDW” followed by a code if it is a door/window sensor.

Remove Battery

Open the sensor cover with a flathead screwdriver and remove the battery. 

Reinsert Battery

Reinsert the battery and immediately press the button for 30 seconds. Place the cover back on the sensor.

Re-add to Home

When the factory reset is completed, you will need to re-add the Shelly device to your home through the Brilliant mobile app. You can do this by going to Settings > Works With > Shelly > Add Device. Please note that it may take a few minutes for your Shelly device to appear online again.